Necessary Settings before Use
| Close the LCD monitor to turn off the
camcorder.
2 Attach the battery pack, then connect
the AC adapter.
AC Adapter
To AC Outlet _ /
(110V to 240V)
• The power/charge lamp blinks to
indicate charging has started.
• When the lamp goes out, charging is
finished.
m To check the remaining battery power
See page 22.
m To detach the battery pack
• You can also use the camcorder with just the
AC adapter.
• The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving subject.
• Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
| Open the LCD monitor to turn on the
camcorder.
Touch MENU.
Battery pack Charging time
BN-VF808U
1 h50m
(Provided)
BN-VF815U 2 h 40 m
BN-VF823U 3 h 40 m
3 Select [DISPLAY SETTINGS].
4 Select [CLOCK ADJUST].
16 EN
To Next Page
Loading...
