Recording Files
Slide the mode switch to select
(video) mode.
SNAPSHOT
Press PLAY/REC to select the
recording mode.
PLAY/RE0
Press START/STOP to start
recording.
START
/STOP
Approximate remaining
time for recording
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control)
m To stop recording
Press START/STOP again.
m To view the last recorded scene
Select @ while recording is paused.
Selecting @during playback deletes that
scene.
To record a still image during video
recording
Press SNAPSHOT.
m To change the video quality
Change the settings in [VIDEO QUALITY].
(_" p. 60)
m To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO]. (_7" p. 60)
|
• The video recording mode is automatically selected when you turn off the camcorder and then
turn on again.
• If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
automatically to conserve power.
• Do not move or shake the camcorder suddenly during recording.
If you do so, the driving sound (hum) of the hard disk may be recorded.
20 EN
To Next Page
Loading...
