Manual Recording
Manual recording mode enables you to set the
focus and screen brightness, etc. manually.
Preparation:
• Select _ or O mode.
• Select the recording mode.
Select [A/M] twice.
in the manual recording mode:
| Touch MENU.
2 Select [MANUAL SETTING].
m To return to the auto recording mode
Select [A/M] so that the _ indicator
appears.
Backlight compensation brightens the subject
by increasing the exposure.
in the manual recording mode:
Select r_l.
m To cancel backlight compensation
Select [_ again.
|
If the LCD monitor is turned upside down, [_ is
not displayed. Change the setting when the
LCD monitor is in the normal position.
3 Select the desired menu.
4 Select the desired setting.
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
To return to the previous screen
Select _::3.
m To quit the screen
Select [QUIT].
28 EN
To Next Page
Loading...
