JVC GZ-MG630 - Selecting Files for Backup and DVD Duplication; Selecting Files for Backup

Copying Files (Continued)
Selecting Files for Backup
Preparation:
= Connect the camcorder to the DVD burner.
• Select N?_mode.
| Select [SELECT AND CREATE].
2 Select the desired menu.
o [CREATE BY DATE]:
Files are sorted according to the date
on which they were recorded. Relevant
files are displayed in a list. Select the
recording date.
o [CREATE BY EVENT]:
Files are sorted according to event.
Relevant files are displayed in a list.
Select the event.
o [CREATE BY PLAYLIST]:
Select the desired playlist from the list
of playlists. The selected playlists are
displayed in a list.
1) Select the desired list.
2) Select the insertion point. To select
other lists, repeat this process.
3) Select [SAVE].
o [SELECT FROM SCENES]:
Select files individually.
1) Select the desired file. To select other
files, repeat this process.
2) Select [SAVE].
3 Select the desired disc number.
• If you select [ALL], all discs in the list are
created.
• To preview scenes, select [CHECK].
• Q mark shows that the disc is created
already.
Select [YES] or [NO].
• [YES]: Displays the thumbnails by group.
• [NO]: Displays the thumbnails by date.
Select [EXECUTE].
• The files are copied on the disc. When
[COMPLETED] appears, touch OK.
• When [INSERT NEXT DISC PRESS
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining files are
copied on the second disc.
• To cancel copying, select [STOP].
To quit the screen
1) Select [QUIT].
2) When [QUIT?] appears, select [YES].
In case of [CREATE BY PLAYMST], date/time
on the file information display shows the
date of copying the file, instead of the actual
recording date.
m To duplicate a disc
The last creation date is displayed. (Up to
20 files)
1) In step 1, select [CREATE DUPMCATE].
2) Select the date and go to step 5.
m To check whether the DVD disc was
created properly
In step 1, select [PLAYBACK].
46 EN