Preparation:
• Create a playlist.
• _ _ Set [SWITCH TO
ANALOG I/O] to [OUTPUT]. (_7" p. 63)
• Turn off all units.
[] To connect using the AV connectors
(analog dubbing)
DC Connector AV Connector
AC Adapter
To AC Outlet
AV Cable --
VCR/DVD Recorder
AV Connector
(Input)
1
2
Open the LCD monitor to turn on the
eameorder.
Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
4. At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
[] To stop dubbing
Stop recording on the VCR/DVD recorder.
[] To hide the date or icons on the screen
Change the settings in [DISPLAY ON TV].
(_J_p. 63)
Switching indication modes on LeD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below:
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/No
indications
EN 53
To Next Page
Loading...
