NOTE
0
The estimated recording time of the supplied battery is approximately 2 hour
30 minutes of actual recording and up to 4 hours 30 minutes of continuous
recording.
0
Do not remove SD card when the POWER/ACCESS lamp is lighted. The
recorded data may become unreadable.
0
With [AUTO POWER OFF] operation, the camera automatically turns off if no
operation is performed for 5 minute, in order to conserve power. (The unit
enters into standby mode when the AC adapter is used.)
0
The angle of view may change when the image stabilizer is turned on or off.
0
When recording underwater, the internal mechanical noise (such as zooming
sound) may be easily picked up and recorded. This is not a malfunction.
Video Quality
This unit can perform recording in high definition (1920x1080).
Default setting of [VIDEO QUALITY] is XP.
o
To change the setting
A
Tap [MENU].
B
Tap [RECORD SETTING].
C
Tap [VIDEO QUALITY].
D
Tap the desired video quality.
AVCHD
(1920x1080)
UXP Higher video quality
XP
(Default)
.
EP
More recording time
* For the approximate video recording time, refer to p. 16.
EN 11
To Next Page
Loading...
Need help?
General
