Shooting under Water
Perform the following settings to shoot underwater.
Setting the White Balance to Underwater Mode
Corrects the color when shooting underwater to record more natural images.
Select
from the following two settings depending on the color of the water at
the shooting location.
1
Tap “MENU”.
.
0
The top menu appears.
2
Tap “RECORD SETTING”.
.
3
Tap “WHITE BALANCE”.
.
4
Tap q or r.
.
Setting Details
q MARINE:BLUE Set this when shooting in deep waters (water
appears blue).
r
MARINE:GREEN
Set this when shooting in shallow waters (water
appears green).
Memo :
0
You may not necessarily achieve the correction effect as expected.
0
It is recommended to conduct a trial recording in advance.
Locking the Screen
1
Tap “MENU”.
.
0
The top menu appears.
2
Tap “RECORD SETTING”.
.
3
Tap 1 to change the items displayed.
.
4
Tap “SCREEN LOCK”.
0
The L button appears.
.
Memo :
0
If “SCREEN LOCK” has been set, it will take a longer time for the unit to
power
off after closing the LCD monitor. If you open the LCD monitor after
closing it, and the power is still turned on, you can continue to record.
Recording
34
To Next Page
Loading...
Need help?
General
