EasyManuals Logo

JVC HA-W500RF User Manual

JVC HA-W500RF
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
1110
ENGLISH
Provided exclusive
AC adaptor
(J47126-001)
To AC outlet
(AC 230 V, 50 Hz)
Note:
Be sure to use the provided exclusive AC adaptor (J47126-001) for connection.
Use of any other AC adaptor may cause a malfunction.
1
2
3
ø2.5 mm plug To receiver CHARGE jack
ø3.5 mm plug
To DC 9 V jack
Plug polarities
CONNECTION
RANGE OF USE
Connection to power supply
1
2
3
To AC outlet
Ø 3,5 mm plug
To DC 9 V jack
ø2.5 mm plug
To receiver CHARGE jack
1
2
3
Provided exclusive
AC adaptor
(J47126-001)
POWER REQUIREMENTS OF HEADPHONES
Charging rechargeable Ni-Cd batteries
1 Set the POWER switch on the headphones to OFF.
The batteries cannot be charged when the switch is set to ON.
2 Connect the DC out (for Receiver Charging) from the AC adaptor to the headphones.
3 Plug the AC adaptor into an AC outlet. The charger starts charging the batteries
automatically.
Note:
The usable area may differ depending on building structure, etc.
The range becomes shorter in the following cases:
In places such as inside an apartment
with reinforced concrete walls, or when
the transmitter and headphones are
separated by obstacles such as steel-
reinforced doors.
When items such as
metal furniture are
situated nearby.
Be sure to keep this unit
more than 0.5 m away
from concrete walls,
metal furniture, etc.
Charging time
The battery can be fully charged in approx. 24 hours.
During recharge the indicator lights in green, which will start to blink rapidly near
completion. Blinking will gradually slow down or turn off at completion.
When done, unplug the DC plug from the battery.
Battery running time
After charging is complete, you can use them continuously for approx. 20 hours.
Tips for better use
Be sure to charge the batteries within the temperature range of 10˚C ~ 35˚C
(50˚F ~ 95˚F).
Charging batteries that are not completely exhausted will cause efficiency to decline.
Be sure to charge them after they have been completely exhausted.
The usable area between the transmitter and the
headphones is within a radius of max 100 m (based
on measurements taken when placed in direct view
in a straight line and no interference situation).
Max: 100 m (Under controlled ambient conditions)
HA-W500RF (EG)E.G 10/25/2002 12:54 Page 10

Other manuals for JVC HA-W500RF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC HA-W500RF and is the answer not in the manual?

JVC HA-W500RF Specifications

General IconGeneral
BrandJVC
ModelHA-W500RF
CategoryHeadphone
LanguageEnglish

Related product manuals