JVC HR-A43U, HR-A63U - Video Stabilizer

19
Video Stabilizer
You can correct vertical vibration when playing back unstable
EP recordings that were made on another VCR. When this
function is set to "ON", vertical vibration will be automatically
corrected. *The default setting is "OFF".

q

6

5 /
8

3

3
¶7
8
1¡
1
2
3
4
5
6
7
8
0
9
CH
MENU
MENU
OK
CH
OK
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VIDEO STABILIZER
SCREEN
2
Move the highlight bar
(arrow) to "VIDEO
STABILIZER" by pressing
CH5
∞
, then press OK.
ACTIVATE VIDEO
STABILIZER
3
Move the highlight bar
(arrow) to "ON" by
pressing CH
5
∞.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
● Regardless of the setting, this function has no effect with SP
recordings, during recording and during special-effects
playback.
● When you finish viewing the tape, be sure to set it back to
"OFF".
MAIN MENU
PROGRAM SET
FUNCTION SET
TUNER SET
CUSTOM SET
AUTO PICTURE
= VIDEO STABILIZER
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
VIDEO STABILIZER
= ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END