JVC JA-S31 - Product Specifications

A:
JA-S31
No. 2368
Specifications
Power Amplifier Section
Output
Power
(both
channels
driven)
Total Harmonic Distortion (at 40W)
(both channels driven)
intermodulation distortion
Load Impedance
Damping Factor
Pre-Amplifier Section
Input Sensitivity/Impedance
Output Level
Phono Equalizer Deviation
Phono Overload
Signal to Noise Ratio
Frequency Response
Loudness Control
(at -30dB Volume Control)
Tone Controls
Power Source
Power Consumption
Dimensions
Weight
40 watts per channel, min. RMS into 8 ohms,
from 20Hz — 20kHz with no more than
0.2% total harmonic distortion
45 watts per channel into 8 ohms at 1kHz. THD = 0.2%
0.06% at 1kHz
0.2% at rated output
4Q -— 162 (SYSTEM-1 or SYSTEM-2)
82 — 16Q (SYSTEM-1+2)
More than 30 at 8Q (20Hz — 20kHz)
PHONO 2.5mV/47kQ2
AUX, TUNER, TAPE PLAY 160mV/50k22
TAPE REC.-1, -2 160mV
DIN REC. 30mV (only on modes intended for areas
other than U.S.A.)
+0.5dB from RIAA curve (20Hz — 15kHz)
180mV (RMS) at 1kHz
PHONO 65aB (RMS)
AUX 85dB (RMS)
AUX, TUNER, TAPE PLAY 20Hz — 30kHz*9dB
+10dB at 100Hz
+4dB at 10kHz
Bass +8dB at 100Hz
Treble +8dB at 10kHz
AC 120V, 50/60Hz (See page 18.)
120W (See page 18.)
5-3/32'"(H) x 15-11/32’'(W) x 13”(D)
(15.2cm x 39.0cm x 33.0cm)
17.6 Ibs. (8.0kq)