JVC KD·APD49 - Ipod Operations

You can use only one of the following playback modes
at a time.
1 MODE
CMW
2 Select your desired playback mode.
iPod operations
You can play songs in an Apple iPod by connecting it
with the supplied direct connection cable for iPod.
You can control playback from the unit or from your
iPod.
• Disconnecting the iPod will stop playback. Press SRC
to listen to another playback source.
* Only while playing an MP3 or a WMA disc.
• Avoid using the iPod if it might hinder your safety
while driving.
• Make sure all important data has been backed up
to avoid losing the data.
• For connection, see the Installation/Connection
Manual (separate volume).
• For details, refer also to the manual supplied for your
iPod.
o Connect an iPod.
11 RPT
12 RND
Plays at random
• Random play
Mode
FOLDER RND*: All tracks of the current folder,
then the tracks of the next folder
and so on. [RHD.]
ALL RND : All tracks of the current disc.
[RHDe]
RND OFF : Cancels.
TRACK RPT : The current track. [RPT]
FOLDER RPT*: All tracks of the current folder.
[.RPT]
RPT OFF : Cancels.
• Repeat play
Mode Plays repeatedly
[ ] : Corresponding indicator lights up on the
display.
If an iPod has been connected •••
To directly select "IPOD" as the source
while listening to another source or
when the power is turned off.
Playback starts automatically from where it had
been paused previously .
...
•
[Turn]