JVC KD·APD49 - Page 21

Symptorm
~
o DiscGlnnot be played back.
• Ike a dIs4: with MP3JWMA 1J3cks I!allded In a format
compliant with ISO 9660 lMf I, Levell, Romeo, or
Joliet.
• Add the menslon code <.mp3> or <.wma> to the
flle names.
• Noise Is generated.
Skip to another track or change the disc. (Do not add the
~
menslon code <.mp3> 01 <.wma> to non-MP3 or
..
WMA tradcs.)
...
,..
i.
c
• A longer readout time is required ("READING" Do not use too many hlerardllcallevels and foIdm.
~
~
keeps flashing on the display).
~
...
~
• Tracks do not play back In the order you have The playback order Is determined when the files an!
intended them to play.
recorded.
• The elapsed playing time Is not correct.
This sometimes occurs during playback. This Is Glused by
how the tracks are recorded on the disc.
• The correct characters are not displayed (e.g.
This unit Gln only display letters (upper case), numbers,
album name). and a limited number of symbols.
o The iPod does not tum on or does not work.
• Check the connecting cable and Its conneaIoII.
o Update the tlrmware version.
.
• Charge the battery.
o The sound Is distorted.
Deaalvate the equalizer either on the unit 01 the iPod.
• "NO IPOD" appears on the display.
• Check the connecting cable and Its connection.
• Charge the battery •
.><
~
o Playback stops. The headphones are disconnected during playback. Turn
..
...
,..
off the lJIIit's ~ and tInI ~on again.
~
...
...
0
• No sound can be heard when connecting an
• DIsconnect the headphones from the IPod RallO.
!!:
iPod nano. o Update the flrmware version of the IPod nallO.
• "NO FILES" appears on the display. No tracks are stored. Import tracks to the IPod.
o The iPod'scontrols do not work after Reset the IPod.
disconnecting from this unit.
• "CANNOT PLAY" appears on the display.
Communication error o<an.
DIsconnect and connect the cable to the iPod again.