EasyManuals Logo

JVC KD-DB42 Installation Manual

JVC KD-DB42
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
0
For safety reasons, the film aerial should be
installed on the passenger side of the vehicle.
0
Check the cable routing before pasting the film
aerial.
.
DAB aerial input (SMB connector)
.
Installing the DAB aerial
.
.
Front pillar cover
.
 
 
 
For front pillar with air bag installed
0
The front pillar cover is secured with a special
clip which may need to be replaced when it is
removed.
Contact your vehicle dealer for details on
removing the front pillar cover and availability
of replacement parts.
.
Clip
Front pillar
0
Install the booster above the air bag so that it
does not obstruct the operation of the air bag.
.
Front pillar
Air bag
Booster
1
Remove the front pillar cover.
Cable (3.5 m)
Film aerial A
Installation overview
Installation overview
ENGLISH |
3

Other manuals for JVC KD-DB42

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DB42 and is the answer not in the manual?

JVC KD-DB42 Specifications

General IconGeneral
MP3 playbackYes
Audio formats supportedAAC, MP3, WMA
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Preset stations quantity24
Output power200 W
Ready for iPod-
Frequency range5 - 20000 Hz
Audio output channels4.0 channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)98 dB
Cables includedUSB

Related product manuals