JVC KD-DB42 User Manual

For details, refer also to the instructions supplied with the external components.
Playing an external component
from Front AUX
.
3.5 mm stereo mini plug
(not supplied)
Portable audio
player, etc.
1
Connect to F-AUX on the front panel.
.
2
Select <F-AUX>.
3
Turn on the connected component and
start playing the source.
Changing display information
F-AUX1AUX/Clock time
Playing an external component
from Rear AUX
.
3.5 mm stereo mini plug
(with “L” shaped connector)
(not supplied)
Portable audio
player, etc.
1
Connect to R-AUX on the rear panel.
.
(Hold)
B<SRC SELECT>
B<R-AUX>
B<R-AUX ON>
.
.
A
B
C
2
Set the source.
.
3
Select <R-AUX>.
4
Turn on the connected component and
start playing the source.
Changing display information
R-AUX1AUX/Clock time
.
Recommended to use a 3-terminal plug head stereo mini plug for optimum audio
output.
Listening to other external components
Listening to other external components
ENGLISH |
13

JVC KD-DB42 Specifications

General

MP3 playback	Yes
Audio formats supported	AAC, MP3, WMA
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Preset stations quantity	24
Output power	200 W
Ready for iPod	-
Frequency range	5 - 20000 Hz
Audio output channels	4.0 channels
Maximum power per channel	50 W
Signal-to-Noise Ratio (SNR)	98 dB
Cables included	USB