For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (A Installation/
Connection Manual)
0
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
unit.
0
For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
device.
0
Operations may be different depending on the connected device.
Preparation
1
Register (pair) a Bluetooth device with KS-BTA100.
0
Refer to the instructions manual supplied with KS-BTA100.
2
Select <SRC SELECT>B<R-AUX>B<BT ADAPTER>. (A page 19)
Using the Bluetooth mobile phone
.
Adjusting the microphone volume
Volume level: High/ Normal (initial)/ Low
.
0
Receiving a call
When a call comes in...
0
Making a call
Making a call to the last connected number from your phone.
0
Switching between hands-free and phone
While talking...
.
0
Ends/rejects call
0
Voice dialing
Voice dialing is available only when the connected mobile
phone has the voice recognition system.
About microphone volume:
0
When you turn off the power of the unit, the volume level changes to Normal.
Using the Bluetooth audio device
1
Select “Bluetooth” as the source. (A page 5)
.
Starts/pauses playback.
0
If playback does not start, operate the Bluetooth audio
player to start playback.
.
0
Selects track. (Press)
0
Fast-forwards or reverses the track. (Hold)
Using Bluetooth
T
devices
Using Bluetooth
T
devices
16
| ENGLISH
To Next Page
Loading...
