JVC KD-DV5000 - Location of the Buttons; Control Panel

5
ENGLISH
LOCATION OF THE BUTTONS
Control panel
Refer to the pages in parentheses for details.
1 SRC (source) button (8, 64, 66, 72, 73)
2 • (standby/on/attenuator)
button (8)
• Control dial
3 Display window
4 Remote sensor
5 5 (up) button
• Functions as the Play button for DVDs and
VCDs.
6 0 (eject) button (28, 42)
7 4/¢ buttons
8 (control panel release) button (65)
9 SEL (select) button
p Number buttons
q MODE (M) button
w DISP (D) (display) button
(10, 16, 48, 67, 72, 77)
e T/P (TP/PTY) button (18, 20)
r ∞ (down) button
• Functions as the Stop button for DVDs and
VCDs.
How to use the MODE (M) button
If you press MODE (M), the unit goes into functions mode. While in functions mode, the number
buttons work as different function buttons.
• The 5/∞ buttons also work as +10/–10 buttons after pressing MODE (M).
Ex.: When the source is the tuner
To use these buttons for original functions again after pressing MODE (M), wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
• Pressing MODE (M) again also clears the functions mode.
Time countdown indicator
M
MODE
345621
KD-DV5000
50Wx4
3 4 5 6 T/P21
D
SRC
DISP
ATT
SEL
MODE
M
1
2 4 5
6
3
8
9
w
q
p
7
e r
EN05-07DV5000[E]f.p65 03.3.23, 18:465