JVC KD-DV7301 - Basic Operations; Using the Control Panel

ENGLISH
8
Basic operations
Using the control panel
1 Select the source.
FM/AM = DAB * = DISC * = USB = CD-CH */
IPOD */D.PLAYER * (or EXT IN)
= BT-PHONE
(Bluetooth Phone) * = BT-AUDIO (Bluetooth
Audio) * = LINE IN = (back to the beginning)
* You cannot select these sources if they are not
ready or not connected.
2 • FM/AM/DAB: Select the bands.
• DISC/USB: Start playback.
3 • Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
• Volume control [Turn].
4 • Adjust the sound mode.
• Enter the PSM settings [Hold].
5 Display window
6 • Activate/deactivate TA Standby Reception.
• Enter RDS programme search [Hold].
7 Eject disc.
8 USB (Universal Serial Bus) input terminal
9 Detach the panel.
p Change the display information.
q Enter functions mode.
Press M MODE, then one of the following buttons
(within 5 seconds)...
EQ : Select the sound mode.
MO : Turn on/off monaural reception.
SSM : Automatic station presetting [Hold].
DUAL : Activate/deactivate Dual Zone.
RPT : Select repeat play.
RND : Select random play.
5 / ∞ : Skip 10 chapters/tracks.
w • FM/AM/DAB: Select preset station/DAB service.
• DISC/USB: Select chapter/title/program/folder/
track/disc (for CD changer).
• BT-PHONE: Select preset phone number.
e • FM/AM/DAB: Search for station/DAB ensemble.
• DISC/USB: Select chapter/track.
• IPOD/D.PLAYER: Select track.
• BT-PHONE/BT-AUDIO: Select setting item/
Select a registered device.
r • DAB: Select DAB service.
• DISC/USB: Select title/program/playlist/folder.
• IPOD/D.PLAYER: Enter the main menu/Pause or
stop playback/Confirm selection.
• BT-PHONE/BT-AUDIO: Pause or start playback/
Enter setting menu/Confirm selection.
EN08-15_DV7302_003A_3.indd 8EN08-15_DV7302_003A_3.indd 8 1/25/07 5:21:56 PM1/25/07 5:21:56 PM