58
Symptom Remedy/Cause
DivX/MPEG Video/MP3/WMA/AAC/WAV
• Disc cannot be played back. • Change the disc.
• Record the tracks using a compliant application in
the appropriate discs (see page 6).
• Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, <.m4a>,
or <.wav> to the file names.
• Noise is generated. The track played back is not an MP3/WMA/AAC/WAV
track. Skip to another track. (Do not add the extension
code <.mp3>, <.wma>, <.m4a>, or <.wav> to
non-MP3/WMA/AAC/WAV tracks.)
• Tracks cannot play back as you have intended
them to play.
Playback order is determined when files are recorded.
• Longer readout time is required (“Reading”
keeps flashing on the display).
Readout time varies due to the complexity of the
folder/file configuration. Do not use too many
hierarchies and folders.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Record the audio track using MP3 or Dolby Digital as
the audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
• Elapsed playing time is not correct. This sometimes occurs during playback. This is caused
by how the tracks are recorded.
• “Please Eject” appears on the display. Insert a disc that contains tracks of appropriate formats.
• Correct characters are not displayed (e.g.
album name).
This unit can display Roman and Cyrillic alphabets
(capital/small), numbers, and a limited number of
Chinese (traditional/simplified), Korean, Thai, Turkish,
Arabic, and Persian characters and symbols. See also
pages 40 and 47.
EN54-63_KD-DV9406_005A_1.indd 58EN54-63_KD-DV9406_005A_1.indd 58 22/4/08 4:11:24 PM22/4/08 4:11:24 PM
Downloaded from Caradio-Manual.com Manuals
To Next Page
