JVC KD-G436

11
ENGLISH
Sound adjustments
You can select a preset sound mode suitable to the
music genre (iEQ: intelligent equalizer).
Indication (For)
BAS*
1
MID*
2
TRE*
3
S.BS*
4
USER
(Flat sound)
00 00 00 OFF
ROCK
(Rock or disco music)
+03 00 +02 ON
CLASSIC
(Classical music)
+01 00 +03 OFF
POPS
(Light music)
+02 +01 +02 OFF
HIP HOP
(Funk or rap music)
+04 –02 +01 ON
JAZZ
(Jazz music)
+03 00 +03 OFF
*
1
Bass
*
2
Mid-range
*
3
Treble
*
4
Super bass
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS*
2
(bass), [–06 to +06]
Adjust the bass.
MID*
2
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE*
2
(treble), [–06 to +06]
Adjust the treble.
FAD*
3
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL*
4
(balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS*
2
(super bass), [S.BS ON or S.BS OFF], [01 to 05,
initial: 03]*
5
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
SUB.W (subwoofer), [00 to 08]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50*
6
]
Adjust the volume.
*
1
Displayed only when “L/O MODE” is set to “WOOFER”
(see page 12).
*
2
When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
*
3
If you are using a two-speaker system, set the fader
level to “00.”
*
4
This adjustment cannot affect the subwoofer output.
*
5
Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.“
*
6
Depending on the amplifier gain control setting. (See
page 13 for details.)
Preset values
EN06-11KD-G436_5_001A_1.indd 11EN06-11KD-G436_5_001A_1.indd 11 10/16/06 5:56:22 PM10/16/06 5:56:22 PM