To Next PageTo Next PageWhy doesn't my Bluetooth device detect my JVC Car Receiver?
The unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again.
What to do if my JVC KD-G545 Car Receiver does not make pairing with the target Bluetooth device?
If the unit does not pair with the target Bluetooth device: - Enter the same PIN code for both the unit and device. - Select the device name from “SPECIAL,” then try to connect again. - Try to pair/connect from the Bluetooth device.
What to do if my JVC KD-G545 Car Receiver does not detect the Bluetooth device?
If the unit does not detect the Bluetooth device: - Check the Bluetooth setting of the device. - Search from the Bluetooth device. After the device detects the unit, select “OPEN” on the unit to connect the device.
General| Brand | JVC |
|---|---|
| Model | KD-G545 |
| Category | Car Receiver |
| Language | English |
Safety guidelines and warnings for Class 1 laser products when open.
Instructions for detaching and attaching the detachable control panel.
Advice on adjusting volume to prevent speaker damage from sudden output changes.
Warning about looking around carefully to avoid traffic accidents when operating the unit.
Procedure to reset the unit, which erases preset adjustments except Bluetooth.
Methods for ejecting a disc, including forcible ejection if needed.
How to use the M MODE button to access different function modes.
Guidance on operating the unit after exposure to extreme temperatures.
Describes the various indicators and information shown on the unit's display window.
Identifies and explains the purpose of each button, dial, and connector on the control panel.
Details the main elements and features of the remote controller, including button functions.
Important warnings regarding battery installation, sunlight exposure, and proper storage of the remote.
Covers initial power-on, source selection, volume adjustment, and sound mode selection.
How to cancel or manage the unit's display demonstration feature.
Instructions for setting the clock and checking the time when the power is off.
How to select radio bands (FM/AM) and switch between sources.
How to activate mono mode for improved reception of weak FM stereo signals.
Explains automatic (SSM) and manual methods for storing radio stations.
How to select and listen to previously stored radio stations.
How to check frequency, clock, or station name while listening to the radio.
Basic procedure for inserting and playing a disc in the unit.
Controls for stopping playback, fast-forwarding/reversing tracks, and navigating tracks.
How to select a specific disc from the CD changer magazine.
Methods to directly access specific tracks or folders on MP3/WMA discs.
Information on compatible CD changers and limitations for MP3/WMA discs.
How to quickly skip multiple tracks during playback on compatible CD changers.
How to change the information displayed for audio CDs and MP3/WMA tracks.
Procedure to lock a disc in the loading slot to prevent accidental ejection.
Options for repeating the current track or all tracks in a folder/disc.
Options for playing tracks randomly from a folder, disc, or changer.
Explains the use of preset sound modes like CLASSIC, ROCK, JAZZ for intelligent equalization.
How to manually adjust Bass, Treble, Fader, Balance, and other sound characteristics.
Guide to changing PSM items, which store preferred settings for various functions.
Details the adjustable sound parameters like Bass, Middle, Treble, Fader, Balance, Loudness, Subwoofer, and Volume.
Settings for display demonstration, clock display, dimmer, and button illumination.
Settings for subwoofer frequency, external input, tag display, and amplifier gain.
Steps to prepare the unit and device for initial Bluetooth connection and registration.
Details on entering the PIN code to establish a secure Bluetooth connection.
Instructions for connecting, disconnecting, and deleting previously registered Bluetooth devices.
Guides on making calls via dial menu, call history, phone book, and direct dialing.
How to use voice commands for calling names or using the dial menu.
Operations like reverse/forward skip, pause/play, and accessing device lists for Bluetooth audio.
Steps to navigate to the Bluetooth menu for further settings adjustments.
Settings for automatic connection, auto answer, and call rejection for Bluetooth phones.
Configuration for message notifications and microphone volume settings for Bluetooth phones.
Displays the Bluetooth software and hardware version numbers.
Preparation steps for iPod operation, including connecting the interface adapter and setting external input.
How to start iPod playback and adjust its volume.
How to adjust sound settings for the iPod and deactivate iPod equalizer.
Explains repeat and random playback modes for iPod music.
How to view track information, elapsed time, and clock time for iPod playback.
Procedures for connecting external audio sources via AUX or CD changer jack.
How to assign custom names to FM/AM radio station frequencies.
Step-by-step guide for entering custom titles for radio stations.
How to erase all previously assigned station titles.
Recommendations for cleaning the unit's connectors to prevent deterioration.
Information on condensation and how to handle potential malfunctions due to moisture.
Proper methods for removing, handling, and storing discs to prevent damage.
Guidelines for cleaning discs to ensure proper playback and prevent errors.
Advice on handling new discs with rough edges and precautions for specific disc types.
Lists of disc types that should not be used with the unit due to potential damage or malfunction.
How to turn the unit on and off, and how playback resumes after power cycles.
Further details on how automatic and manual station storage works.
Information on supported disc formats (CD-DA, MP3, WMA) and specific compatibility notes like DualDisc.
Comprehensive information on MP3/WMA file compatibility, formats, bit rates, and naming conventions.
Details on CD-R/CD-RW compatibility, potential playback issues, and types of discs to avoid.
Lists specific MP3 and WMA file types or encodings that the unit cannot play.
How changing sources affects playback and procedures for disc ejection.
General advice for Bluetooth operations, including driving precautions and device compatibility.
Explains common Bluetooth error messages and their corresponding solutions.
Lists the types of iPods that can be controlled through the interface adapter.
Important notes on iPod charging, control disabling, text display limitations, and scrolling information.
Advice for resolving issues when the iPod does not play correctly or connect.
How changing the AMP GAIN setting affects the unit's volume level.
Information on the limit for assigning titles and how to manage them.
Lists trademarks and logos related to Microsoft, Windows Media, iPod, and Bluetooth.
Covers common problems like no sound, unit not working, SSM issues, and radio static.
Solutions for discs not playing, CD-R/RW errors, skipping problems, and ejection failures.
Addresses problems with MP3/WMA playback, including format compatibility, file naming, and playback order.
Solutions for MP3/WMA playback errors like incorrect elapsed time or display character issues.
Troubleshooting steps for Bluetooth device detection, pairing, audio quality, and connection problems.
Addresses issues related to CD changers, including "NO DISC", "NO MAGAZINE", reset errors, and unit malfunction.
Solutions for iPod playback problems such as no power, distorted sound, no iPod detected, and control issues.
Details power output, impedance, tone control range, frequency response, and signal-to-noise ratio.
Information on CD player type, signal detection, channels, frequency response, dynamic range, and MP3/WMA formats.
Provides specifications for FM and AM tuner sensitivity, selectivity, frequency response, and stereo separation.
Covers power requirements, operating voltage, grounding, temperature limits, dimensions, and mass.
Reminder to reset the unit if experiencing operational problems, referring to the relevant page.
