EasyManua.ls Logo

JVC KD-G547 - General Settings Configuration (PSM); Display Demonstration Management; Clock Display and Time Setting

JVC KD-G547
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
ENGLISH
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 14 and 15.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
Continued on the next page
Indications Item
( : Initial)
Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON
DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
CLOCK DISP *
1
Clock display
CLOCK ON
CLOCK OFF
: The clock time is shown on the display at all times when the
power is turned off.
: Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [5].
CLOCK HOUR
Hour adjustment
0 – 23 (1 – 12) [Initial: 0 (0:00)], [5].
CLOCK MIN
Minute adjustment
00 – 59 [Initial: 00 (0:00)], [5].
24H/12H
Time display mode
24 HOUR
12 HOUR
: See also page 5 for setting.
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select
“CLOCK OFF” to save the car’s battery.
EN08-15_KD-G547[EE]_2.indd 13EN08-15_KD-G547[EE]_2.indd 13 10/30/07 9:34:08 AM10/30/07 9:34:08 AM

Table of Contents

Related product manuals