JVC KD-G730

ENGLISH
15EXTERNAL DEVICES
3 Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4 Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
Connecting a special device
Perform steps 1 – 3 on page 14, then...
1 Select “Special Device.”
The unit displays the list of the preset devices.
2 Select a device you want to connect.
3 Use “Open” or “Search” to connect.
Connecting/disconnecting a registered device
1 Select “Bluetooth Phone” or “Bluetooth
Audio.”
2 Select a registered device you want to
connect/disconnect.
3 Enter setting menu.
4 Select “Connect” or “Disconnect” to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
“Auto Connect” on page 36.)
Deleting a registered device
1 Select “Bluetooth Phone” or “Bluetooth
Audio.”
2 Select a registered device you want to delete.
3 Enter setting menu.
4 Select “Delete.”
5 Delete the selection.
• Press number button 3 to select “No” or return to
step 4 above.
EN08-17_KD-AR780_G730[J]3.indd 15EN08-17_KD-AR780_G730[J]3.indd 15 1/26/07 3:25:28 PM1/26/07 3:25:28 PM