JVC KD-G730 - Preparation; Cancel the display demonstration and set the clock

ENGLISH
6 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 31 and 32.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
@ Finish the procedure.
Changing the display information and pattern
Ex.: When tuner is selected as the source
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information and pattern
Source operation display Audio level meter display
(see “LevelMeter” on page 31)
EN02-07_KD-AR780_G730[J]2.indd 6EN02-07_KD-AR780_G730[J]2.indd 6 1/24/07 11:44:26 AM1/24/07 11:44:26 AM