ENGLISH
33
5 Store the service.
Tuning in to a preset DAB service
Using the number buttons
1
2 Select the preset DAB service
(primary) number (1 – 6) you want to
listen to.
If the selected primary service has some
secondary services, pressing the same
button again will tune in to the secondary
services.
Using the Preset Service List
1 Display the Preset Service List, then
select the preset DAB service you want
to listen to.
2 Change to the selected DAB service.
Using the standby reception
You can use three types of Standby Reception.
• Road Traffic News Standby Reception—TA
Standby Reception (see the following).
• Announcement Standby Reception (see the
following)
• PTY Standby Reception (see page 34).
Road Traffic News Standby Reception
(TA Standby Reception)
Road Traffic News Standby Reception allows
the unit to switch temporarily to the Road
Traffic News (or Traffic Announcement) from
any source other than AM. The volume changes
to the preset TA volume level if the current level
is lower than the preset level (see page 21).
• Operations are exactly the same as explained
on page 11 for FM RDS stations.
• You cannot use Road Traffic News Standby
Reception (TA Standby Reception) separately
for the DAB tuner and FM tuner.
Announcement Standby Reception
Announcement Standby Reception allows the
unit to switch temporarily to your favorite
service (announcement type).
To activate the Announcement Standby
Reception and select the announcement type
1
2
Activating the Announcement
Standby Reception.
Display the currently selected
announcement type.
Continued on next page...
EN28-35KD-G821[EX_EU]2.indd 33EN28-35KD-G821[EX_EU]2.indd 33 15/12/05 3:03:11 pm15/12/05 3:03:11 pm
To Next Page
Loading...
Need help?
General
