To Next Page
A
Angela TranSep 6, 2025
Why source cannot be selected on JVC KD-HDR52?
- MMorgan GonzalezSep 6, 2025
Check the [SRC SELECT] setting.
Why source cannot be selected on JVC KD-HDR52?
Check the [SRC SELECT] setting.
Why is there no sound coming from my JVC KD-HDR52?
If you are not getting any sound from your JVC Car Receiver, try the following: First, adjust the volume to the desired level. Second, check all cords and connections to ensure they are properly connected. Also, ensure the rear ground terminal connected to the car’s chassis uses shorter, thicker cords. If “MISWIRING CHK WIRING Check to be sure the terminals of the speaker wires are insulated THEN RESET UNIT” appears, ensure the speaker wires are properly insulated and then reset the unit. If “WARNING CHK WIRING THEN consult your nearest service center. RESET UNIT” appears, this requires a service center consultation.
What to do if my iPod/iPhone does not turn on or does not work with my JVC KD-HDR52?
If your iPod/iPhone does not turn on or work with your JVC Car Receiver, check the connection between the unit and the iPod/iPhone. You can also try detaching and resetting the iPod/iPhone using a hard reset.
How to fix sound quality changes when receiving HD Radio stations/ channels on JVC KD-HDR52 Car Receiver?
To fix sound quality changes when receiving HD Radio stations/channels on your JVC Car Receiver, set the reception mode to either [ANALOG] or [DIGITAL].
What does “READING” flashing on my JVC Car Receiver mean?
If you see “READING” flashing on your JVC Car Receiver, avoid using too many hierarchical levels and folders. You can also try reloading the disc or reattaching the USB device.
Why is the radio reception poor on my JVC KD-HDR52 Car Receiver?
If you are experiencing poor radio reception on your JVC Car Receiver, make sure the antenna is firmly connected and fully extended.
What to do if my JVC Car Receiver says “CANNOT PLAY” and the connected device cannot be detected?
If your JVC Car Receiver displays “CANNOT PLAY” or fails to detect the connected device, verify that the connected device is compatible with the unit and that the files are in a supported format. You can also try reattaching the device.
What to do if there is no sound when receiving HD Radio stations on my JVC KD-HDR52?
If you cannot hear any sound when receiving HD Radio stations on your JVC Car Receiver, select [AUTO] or [DIGITAL].
Why does my JVC Car Receiver have no sound?
If you cannot hear any sound from your JVC Car Receiver, try the following: * Adjust the volume to the optimum level. * Check the cords and connections. * Ensure the rear ground terminal connected to the car’s chassis uses shorter and thicker cords. * Check that the terminals of the speaker wires are insulated properly, then reset the unit.
What does “UPGRADE APP” mean on my JVC Car Receiver?
If your JVC Car Receiver displays “UPGRADE APP”, make sure you have installed the latest version of the Pandora application on your device.
General| CD Playback | Yes |
|---|---|
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Port | Yes |
| Auxiliary Input | Yes |
| Bluetooth | No |
| iPod Compatibility | Yes |
| Subwoofer Output | Yes |
| Detachable Face | Yes |
| Remote Control | Yes |
| Tuner | AM/FM |
| RMS Power Output | 22 watts |
| Peak Power Output | 50W x 4 |
| Preamp Voltage | 2.5 volts |
| Presets | 18 |
