To Next Page
T
Thomas HowardSep 9, 2025
What does 'CAN’T TRANS IPOD FULL' mean on my JVC Car Receiver?
- TTodd OliverSep 9, 2025
If “CAN’T TRANS IPOD FULL” appears on your JVC Car Receiver, it means the memory of the iPod/iPhone is full.
What does 'CAN’T TRANS IPOD FULL' mean on my JVC Car Receiver?
If “CAN’T TRANS IPOD FULL” appears on your JVC Car Receiver, it means the memory of the iPod/iPhone is full.
What to do if JVC Car Receiver does not work?
If your JVC Car Receiver is not working at all, try resetting the unit.
Why my iPod/iPhone does not work with JVC Car Receiver?
If your iPod/iPhone is not turning on or working with the JVC Car Receiver, check the connection between the unit and your iPod/iPhone. You can also detach and reset the iPod/iPhone using a hard reset. Also, verify the setting is appropriate.
What does it mean when 'READING' keeps flashing on my JVC Car Receiver display?
When “READING” keeps flashing on the display of your JVC Car Receiver, it indicates that a longer readout time is required. Avoid using too many hierarchical levels and folders. If the issue persists, try reloading the disc or reattaching the USB device.
Why does my JVC Car Receiver display 'CANNOT PLAY'?
If “CANNOT PLAY” flashes on the display of your JVC Car Receiver, check whether the connected device is compatible with the unit. Also, ensure that the device contains files in a supported format and try reattaching the device.
What does 'MISWIRING CHK WIRING THEN RESET UNIT' mean on my JVC Car Receiver?
When “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on the display of your JVC Car Receiver and no operations can be done, ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. If the message persists, no answer.
What does 'NO STATION' mean on my JVC Car Receiver?
If “NO STATION” appears on your JVC Car Receiver, there is no registered station in your iPod/iPhone.
What does 'SET UP PANDORA ON YOUR DEVICE' mean on my JVC Car Receiver?
If “SET UP PANDORA ON YOUR DEVICE” appears on your JVC Car Receiver, Pandora setup is not completed. Connect the iPod/iPhone to this unit after completing the setup in your iPod/iPhone.
What does 'NO TAG DATA' mean on my JVC Car Receiver?
If “NO TAG DATA” appears on your JVC Car Receiver, it indicates that the broadcast currently received does not support iTunes Tagging or the broadcast does not provide PSD.
Why aren't the correct characters displayed on my JVC Car Receiver?
If the correct characters are not displayed (e.g., album name) on your JVC Car Receiver, this unit can only display letters (upper case), numbers, and a limited number of symbols.
Details safety compliance and precautions for Class 1 Laser Products.
Covers crucial advice on volume, temperature, condensation, and vehicle operation.
Instructions for panel attachment, resetting, disc ejection, and cleaning.
Guide to cancel display demo and set the unit's clock.
Explains the functions of buttons on the main control panel.
Explains digital sound, PSD, HD2/HD3 channels, and iTunes Tagging.
Instructions for manually and automatically storing radio stations.
Steps to tag songs from HD Radio and transfer them to iPod/iPhone.
Information on compatible media and file formats for playback.
Steps for connecting, selecting control modes, and navigating tracks.
Guide to installing the app, creating an account, and operating Pandora.
Instructions for connecting devices via Front/Rear AUX inputs.
How to choose from preset colors for button and display zones.
Steps to set preferred brightness levels for button and display zones.
Instructions for initial use and battery replacement of the remote controller.
Guide to menu access, dimmer, brightness, scroll, and tag display.
Details on subwoofer, HPF, gain, SSM, area, mono, and source settings.
Information on playable discs, audio file formats, and USB device requirements.
Covers USB device recognition, file limits, and compatible iPod/iPhone models.
Solutions for sound, connection, display, and radio reception issues.
Solutions for 'NOT SUPPORT', 'CANNOT PLAY', and Pandora setup errors.
Details power output, impedance, frequency response for amplifier and tuner.
Covers USB standards, general requirements, dimensions, and mass.
General| Tuner Bands | AM/FM |
|---|---|
| HD Radio | Yes |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Display Type | LCD |
| Detachable Face | Yes |
| Auxiliary Input | Yes |
| CD Text | Yes |
| Remote Control | Yes |
| Channels | 4 |
| Max Power Output | 50 Watts x 4 |
| RMS Power Output | 22 Watts x 4 Channels |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Preamp Voltage | 2.5 Volts |
| Preset Stations | 18 FM, 6 AM |
