JVC KD-HDR60 - Page 28

categ~~ Mend items 1,~ ' ..
:sele4a~li~b1gs~ [reference ,ag~l~~};;£~:T;(;';i' '>; .~\;,
,. ··/~·ti:.·rlr!~·!t~r~;~)\14,n;l
DIMMER
• DIMMER AUTO:
Dims the display and button illumination when you turn on
Dimmer the headlights.*2
• DIMMER OFF:
Cancels.
• DIMMER ON:
Dims the display and button illumination.
>-
SCROLL*3
• SCROLL ONCE:
Scrolls the displayed information once.
:3
Scroll
• SCROLL AUTO:
Repeats scrolling (at 5-second intervals).
a.
'"
E
• SCROLL OFF:
Cancels.
Pressing D1SP for more than one second can scroll the display regardless of the
setting.
TAG DISPLAY
• TAG ON:
Shows the Tag information while playing MP3/WMA tracks.
Tag display
• TAG OFF:
Cancels.
SSM *4
For settings, [11].
Strong-station
• For FM : SSM 01-06, SSM 07-12, SSM 13-18
Sequential
• For AM : SSM 01-06
Memory
AREA
• AREA US:
When using in North/Central/South America. AM/FM
Tuner channel
intervals are set to 10 kHz/200 kHz.
interval
• AREA EU:
When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
• AREA SA:
When using in South American countries where FM interval
is 100 kHz. AM interva I is set to 10kHz.
ell:
MONO
• MONO ON:
Activate monaural mode to improve FM reception, but stereo
.....
Monaural mode effect will be lost, [10].
z
::;)
....
• MONO OFF:
Restore the stereo effect.
SID*5
Your SIRIUS identification number scrolls on the display 5 seconds after "SID" is
SIRIUS ID
selected, [19].
BLEND HOLD*4
• AUTO:
Switch between digital and analog audio automatically [10].
HD Radio
• DIGITAL:
Tuning to digital audio only.
reception mode
• ANALOG:
Tuning to analog audio only.
IF BAND
• AUTO:
Increases the tuner selectivity to reduce interference noises
Intermediate between adjacent stations. (Stereo effect may be lost.)
frequency band
• WIDE:
Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect will
remain.
*2 The illumination control lead connection is required. (See "Installation/Connection Manual.'?
*3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*4 Displayed only when FM or AM is selected as the source.
*5 Displayed only when SIRIUS Satellite Radio is connected.
28
categ~~ Mend items 1,~ ' ..
:sele4a~li~b1gs~ [reference ,ag~l~~};;£~:T;(;';i' '>; .~\;,
,. ··/~·ti:.·rlr!~·!t~r~;~)\14,n;l
DIMMER
• DIMMER AUTO:
Dims the display and button illumination when you turn on
Dimmer the headlights.*2
• DIMMER OFF:
Cancels.
• DIMMER ON:
Dims the display and button illumination.
>-
SCROLL*3
• SCROLL ONCE:
Scrolls the displayed information once.
:3
Scroll
• SCROLL AUTO:
Repeats scrolling (at 5-second intervals).
a.
'"
E
• SCROLL OFF:
Cancels.
Pressing D1SP for more than one second can scroll the display regardless of the
setting.
TAG DISPLAY
• TAG ON:
Shows the Tag information while playing MP3/WMA tracks.
Tag display
• TAG OFF:
Cancels.
SSM *4
For settings, [11].
Strong-station
• For FM : SSM 01-06, SSM 07-12, SSM 13-18
Sequential
• For AM : SSM 01-06
Memory
AREA
• AREA US:
When using in North/Central/South America. AM/FM
Tuner channel
intervals are set to 10 kHz/200 kHz.
interval
• AREA EU:
When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
• AREA SA:
When using in South American countries where FM interval
is 100 kHz. AM interva I is set to 10kHz.
ell:
MONO
• MONO ON:
Activate monaural mode to improve FM reception, but stereo
.....
Monaural mode effect will be lost, [10].
z
::;)
....
• MONO OFF:
Restore the stereo effect.
SID*5
Your SIRIUS identification number scrolls on the display 5 seconds after "SID" is
SIRIUS ID
selected, [19].
BLEND HOLD*4
• AUTO:
Switch between digital and analog audio automatically [10].
HD Radio
• DIGITAL:
Tuning to digital audio only.
reception mode
• ANALOG:
Tuning to analog audio only.
IF BAND
• AUTO:
Increases the tuner selectivity to reduce interference noises
Intermediate between adjacent stations. (Stereo effect may be lost.)
frequency band
• WIDE:
Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect will
remain.
*2 The illumination control lead connection is required. (See "Installation/Connection Manual.'?
*3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*4 Displayed only when FM or AM is selected as the source.
*5 Displayed only when SIRIUS Satellite Radio is connected.
28