JVC KD-HDR60 User Manual

For settings, [31].
[Initial: COLOR 06]
All ZONE
DISPZONE
Display zone
BUTTON ZONE COLOR 01 - For settings, [31].
COLOR 29, USER: [Initial: COLOR 06]
~---~ -=-------=------------
For settings, [31].
[Initial: COLOR 01]
DAY COLOR
• BUTTON ZONE
• DISP ZONE:
For settings, [32].
NIGHT COLOR
• BUTTON ZONE
• DISPZONE:
For settings, [32].
MENU COLOR
Menu color
RING COlOR*6
Ring color
• OFF:
• ON:
• OFF:
• ON:
Cancels.
The display and buttons illumination will change to white
color during SET menu, LIST menu and playback mode
operations.
Cancels.
When a call comes in, the display will flash in blue.
• The display will change to the original color when the call
is answered or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
FADER*7
Fader
FADER R12
-FADERF12:
Adjust the front and rear speaker output balance.
[Initial: 00]
BAlANCE*8
Balance
BALANCEl12
- BALANCE R12:
Adjust the left and right speaker output balance.
[Initial: 00]
o
E
=
<
VOL ADJUST
Volume adjust
VOlADJ-10
- VOL ADJ +10:
[Initial: VOL ADJ 00]
Preset the volume adjustment level of each source (except
FM, BT PHONE and BT AUDIO), compared to the FM volume
level. The volume level will automatically increase or
decrease when you change the source.
• Before making an adjustment, select the source you want
to adjust.
• "VOL ADJ FIX" appears on the display if"FM", "BT PHONE",
or "BT AUDIO" is selected as the source.
SUB.W FREQ • lOW:
Subwoofer cutoff • MID:
frequency • HIGH:
Frequencies lower than 72 Hz are sent to the subwoofer.
Frequencies lower than 111 Hz are sent to the subwoofer.
Frequencies lower than 157 Hz are sent to the subwoofer.
*6 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*7 If you are using a two-speaker system, set the fader level to "00."
*8 This adjustment will not affect the subwoofer output.
Continued on the next page
SETIINGS
29
For settings, [31].
[Initial: COLOR 06]
All ZONE
DISPZONE
Display zone
BUTTON ZONE COLOR 01 - For settings, [31].
COLOR 29, USER: [Initial: COLOR 06]
~---~ -=-------=------------
For settings, [31].
[Initial: COLOR 01]
DAY COLOR
• BUTTON ZONE
• DISP ZONE:
For settings, [32].
NIGHT COLOR
• BUTTON ZONE
• DISPZONE:
For settings, [32].
MENU COLOR
Menu color
RING COlOR*6
Ring color
• OFF:
• ON:
• OFF:
• ON:
Cancels.
The display and buttons illumination will change to white
color during SET menu, LIST menu and playback mode
operations.
Cancels.
When a call comes in, the display will flash in blue.
• The display will change to the original color when the call
is answered or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
FADER*7
Fader
FADER R12
-FADERF12:
Adjust the front and rear speaker output balance.
[Initial: 00]
BAlANCE*8
Balance
BALANCEl12
- BALANCE R12:
Adjust the left and right speaker output balance.
[Initial: 00]
o
E
=
<
VOL ADJUST
Volume adjust
VOlADJ-10
- VOL ADJ +10:
[Initial: VOL ADJ 00]
Preset the volume adjustment level of each source (except
FM, BT PHONE and BT AUDIO), compared to the FM volume
level. The volume level will automatically increase or
decrease when you change the source.
• Before making an adjustment, select the source you want
to adjust.
• "VOL ADJ FIX" appears on the display if"FM", "BT PHONE",
or "BT AUDIO" is selected as the source.
SUB.W FREQ • lOW:
Subwoofer cutoff • MID:
frequency • HIGH:
Frequencies lower than 72 Hz are sent to the subwoofer.
Frequencies lower than 111 Hz are sent to the subwoofer.
Frequencies lower than 157 Hz are sent to the subwoofer.
*6 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*7 If you are using a two-speaker system, set the fader level to "00."
*8 This adjustment will not affect the subwoofer output.
Continued on the next page
SETIINGS
29

JVC KD-HDR60 Specifications

General

Brand	JVC
Model	KD-HDR60
Category	Car Stereo System
Language	English