How to fix no sound from the speakers on my JVC Car Receiver?
- LLaura RobinsonJul 30, 2025
If you cannot hear any sound from the speakers of your JVC Car Receiver, there might be several reasons. First, check if the volume is set too low and adjust it to a suitable level. Also, verify that all connections are correctly made. If the issue persists, the built-in microcomputer may have malfunctioned due to noise. In this case, press the reset button on the control panel. Finally, ensure the control panel is properly attached; remove it, clean the connectors, and reattach it. If the reset button does not work, check the installation.