To Next PageTo Next Page
Need help?Do you have a question about the JVC KD-LH7R and is the answer not in the manual?
General| Brand | JVC |
|---|---|
| Model | KD-LH7R |
| Category | Car Receiver |
| Language | English |
Essential safety guidelines for handling laser apparatus to prevent exposure to hazardous radiation.
Detailed diagram and listing of buttons and indicators on the main control panel.
Explanation of various indicators displayed on the unit's screen during operation.
Explanation of the functions of each button on the RM-RK50 remote control.
How to select the desired FM band (FM1, FM2, FM3) or AM band for radio reception.
Instructions for initiating an automatic scan for radio stations by pressing directional buttons.
How to select the desired FM band (FM1, FM2, FM3) or AM band for manual tuning.
Steps to enter manual tuning mode by holding directional buttons until 'MANU' appears.
How to fine-tune the radio frequency using directional buttons while in manual mode.
Guide to switching to mono sound mode to improve reception quality when stereo signal is weak.
Procedure to select the FM band (FM1, FM2, FM3) before initiating automatic station saving.
How to activate automatic station memory saving by holding specific buttons for over 2 seconds.
Procedure to select the desired FM or AM band for manual station memory saving.
Steps to tune to a desired radio station and save it to a preset number.
How to store a tuned radio station into a specific preset memory button (1-6) by holding it for over 2 seconds.
Instructions for repeating the saving process for other stations using different preset numbers.
How to select a previously saved radio station by pressing its corresponding preset number button.
Explanation of the Radio Data System (RDS) and its capabilities for enhanced radio broadcasting.
How the unit automatically retunes to a stronger signal for the same program when reception weakens.
Enables AF mode when Regionalization is off, allowing the unit to switch to a different station in the same network.
Enables AF mode with Regionalization on, switching to a same program on a different station in the network.
Disables AF mode, meaning the unit will not automatically retune to alternative frequencies.
Allows the unit to temporarily switch to Traffic Announcement (TA) from the current audio source.
How to activate the TA Standby feature by pressing the TP/PTY button.
Explanation of the TP indicator's behavior (lit or flashing) indicating TA Standby status.
How to deactivate the TA Standby feature by pressing the TP/PTY button again.
Allows temporary switching to a preferred program type (PTY) from the current audio source.
How to select the 'PTY STBY' option to enable program type standby.
How to choose one of the twenty-nine available PTY codes for program type selection.
Explanation of the PTY indicator's behavior (lit or flashing) indicating PTY Standby status.
List of default favorite program types pre-stored on the unit's numbered buttons.
How to select a specific PTY code from the available list for searching.
Procedure to save a chosen PTY code to a specific preset number by holding the button.
How to confirm the saving of a favorite program type by holding the TP/PTY button.
How to start searching for program types by holding the TP/PTY button while listening to FM radio.
How to select a specific PTY code from the available list for searching.
How to initiate the search for a program type using directional buttons.
How to cycle through display options like station name, frequency, or track info during FM radio playback.
Enabling the 'Program Search' function to automatically find stations of the same program type.
How to set a preferred volume level for traffic announcements (TA).
Procedure to enable or disable the automatic clock synchronization using RDS CT data.
How to open the detachable control panel to access the disc slot.
Procedure for inserting a compact disc into the unit's drive for playback.
How to manually close the control panel after inserting a disc.
How to fast forward or rewind within the current track by holding the directional buttons.
How to skip to the beginning of the next or previous track by quickly pressing directional buttons.
How to select a specific track number directly using the numbered buttons.
How to enable random playback mode for all tracks on the disc.
How to enable repeat playback for the current track or all tracks in the current directory.
How to choose what information (disc/artist name, track name) is displayed during text playback.
How to open the detachable control panel to access the disc slot for MP3 playback.
Procedure for inserting an MP3 disc into the unit's drive, initiating automatic playback after scanning.
How to manually close the control panel after inserting an MP3 disc.
How to display MP3 file metadata (album, artist, track name) when TAG DISP is set to ON.
How to display only folder and file names when TAG DISP is set to OFF.
How to fast forward or rewind within an MP3 file by holding the directional buttons.
How to skip to the next or previous MP3 file by quickly pressing directional buttons.
How to enable random playback mode for tracks, indicated by the RND indicator.
How to enable repeat playback for the current track or all tracks, indicated by the RPT indicator.
Guide to adjusting Bass, Treble, Fader, Balance, Loudness, and Volume using the SEL button and control dial.
Procedure to enable the C-EQ Link feature, allowing source-specific sound mode settings.
Select sound mode, adjust Bass, Treble, and other parameters, then repeat for other settings.
Store your personalized sound settings into memory for later recall.
How to select and set the current hour for the clock display.
How to select and set the current minute for the clock display.
How to choose between a 12-hour or 24-hour format for the clock display.
Overview of the process for accessing and adjusting PSM settings.
How to select the audio source (e.g., CD) for which a custom name will be assigned.
Procedure for entering a custom name for the selected audio source using the unit's controls.
How to erase characters while naming an audio source.
Step-by-step guide on how to detach and remove the front control panel from the car stereo.
How to correctly reattach the detachable control panel to the main unit.
Important notes on cleaning the connectors of the control panel and main unit to ensure proper contact.
How to select the CD changer as the audio source.
Procedure to start playback from the CD changer, noting automatic power-on.
How to fast forward or rewind within a track on the CD changer.
How to enable random playback mode for tracks, indicated by the RND indicator.
How to enable repeat playback for the current track or all tracks, indicated by the RPT indicator.
How to select the LINE IN input source for external component playback.
Procedure to connect an external component and start playing its audio source.
How to adjust the listening volume for the external component.
How to fine-tune sound settings like Bass, Treble, etc., for the external component.
How to switch the unit's tuner to the DAB mode.
How to select the desired DAB frequency band (DAB1, DAB2, or DAB3).
Select DAB tuner, band, group, and service for saving.
Store selected DAB services to memory buttons 1-6 by holding the button.
Repeat the saving process for other DAB services using different preset numbers.
How to switch the unit's tuner to the DAB mode.
How the unit automatically switches between DAB and FM RDS for seamless program reception.
Procedure to adjust and set the input volume level for the DAB tuner.
Procedure to enable or disable the Alternative Frequency (AF) feature for DAB services.
Table listing symptoms like distorted sound or playback errors and their corresponding solutions.
Specific troubleshooting steps for issues encountered with MP3 disc playback, including file errors and format compatibility.
Proper methods for handling, cleaning, storing discs, and warnings about disc types and conditions.
Information on condensation, playing new discs, and general warnings for optimal unit performance.
Technical details for the audio amplifier, including output power, frequency response, and signal-to-noise ratio.
Technical details for the FM/AM tuner, including frequency ranges, sensitivity, and selectivity.
Technical details for the CD player, including type, signal detection system, and frequency response.
General specifications including power requirements, operating temperature, dimensions, and weight.
