JVC KD-LX100 - External Component Operations; Playing an External Component

26
ENGLISH
EXTERNAL COMPONENT OPERATIONS
SOURCE
KD-LX100
SSM
BAND
OFF
BBE
MODE
DISP
SEL
10
78
9
11 12
INT RPT RNDLOCALMONOSCM
1 Select the external component.
Each time you press the
button, the source changes
as described on page 7.
2 Operate the external component.
Note:
For the external component connection, see the
Installation/Connection Manual (separate volume).
3 Adjust the volume.
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use — EXT INPUT” on page 20.)
EN26-29.KD-LX100[J]f 1/8/01, 10:22 AM26