EasyManua.ls Logo

JVC KD-LX3 - Page 25

JVC KD-LX3
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
ENGLISH
To select the clock display
You can select either the clock or the source name to be shown on the lower part of the
display. When shipped from the factory, the clock is selected.
CLK DISP ON: Clock
CLK DISP OFF:Source name (or station band)
To check the other information during play
Press DISP (Display). Each time you press the button, the other information (either the clock
or the source name) will be shown on the lower part of the display for a while.
To select the level meter
You can select the level meter display according to your preference. When shipped from the
factory, “NORMAL is selected.
NORMAL: Normal audio level meter
HIGHWAY: Level meter illuminates as if you are driving on a highway.
SIDE: Level meter illuminates horizontally.
RACE: Level meter illuminates as if cars are racing.
LEVEL OFF: Level meter stays lit and does not change its illumination.
ALL OFF: Level meter turns off.
To select the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
DIMMER AUTO: Activates Auto Dimmer.
DIMMER OFF: Cancels Auto Dimmer.
DIMMER ON: Always dims the display.
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “DIMMER ON” or “DIMMER OFF.
To turn on/off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
BEEP ON: Activates the key-touch tone.
BEEP OFF: Deactivates the key-touch tone.
EN20-29.KD-LX3[J]/f 99.3.9, 10:09 AM25

Table of Contents

Related product manuals