Why can't my JVC Car Receiver play back a CD-R/CD-RW or skip tracks?
If your JVC Car Receiver cannot play back a CD-R/CD-RW or skip tracks, make sure you are using a finalized disc. Finalize the CD-R/CD-RW with the component used for recording.
Why is my JVC Car Receiver interrupting sound while playing a disc?
If the sound from your JVC Car Receiver is sometimes interrupted while playing a disc, consider these potential solutions: * Stop playback while driving on rough roads. * Try changing the disc. * Check the cords and connections.
What to do if my JVC Car Receiver displays 'PLEASE' and 'EJECT' alternately?
If your JVC Car Receiver is showing “PLEASE” and “EJECT” alternately on the display, press the 0 button, and then insert the disc correctly.
Why is there static noise while listening to the radio on my JVC Car Receiver?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, ensure that the aerial is firmly connected.
What to do if my JVC Car Receiver is not reading my disc and shows 'NO DISC'?
If your JVC Car Receiver displays “NO DISC”, the solution is to insert a playable disc into the loading slot.
What to do if my JVC Car Receiver displays 'MISWIRING CHK WIRING THEN RESET UNIT'?
If your JVC Car Receiver displays the message “MISWIRING CHK WIRING THEN RESET UNIT”, check that the terminals of the speaker leads are properly covered with insulating tape. After checking the wiring, reset the unit.
Why is there no sound from my JVC KD-R327EE Car Stereo System speakers?
If you can't hear any sound from the speakers, try these steps: First, adjust the volume to a suitable level. Second, ensure that the unit is not muted or paused. Finally, check the cords and connections to make sure they are properly connected.
Why do tracks not play in the intended order on my JVC KD-R327EE?
If tracks do not play back in the order you have intended them to play on your JVC Car Stereo System, note that the playback order is determined when the files are recorded.
Why doesn't SSM automatic presetting work on my JVC KD-R327EE?
If SSM automatic presetting does not work on your JVC Car Stereo System, store stations manually.
Why does 'READING' keep flashing on the display of my JVC KD-R327EE Car Stereo System?
If “READING” keeps flashing on the display of your JVC Car Stereo System, it means a longer readout time is required. Avoid using too many hierarchical levels and folders.
General| CD Playback | Yes |
|---|---|
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Input | Yes |
| Bluetooth | No |
| AUX Input | Yes |
| Pre-out Voltage | 2.5V |
| Display Type | LCD |
| Detachable Faceplate | Yes |
| Remote Control | Yes |
| Power Output | 50 Watts x 4 |
| RMS Power Output | 22W x 4 |
| Tuner | FM/AM |
| Preset Stations | 24 (18 FM, 6 AM) |
| Steering Wheel Control | Yes |
To Next Page
