10 ENGLISH
Listening to the USB device
This unit can play MP3/WMA tracks stored in a USB device.
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing
/ SOURCE
turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
USB input jack
USB memory
Changing the display information
Disc title/Album name/performer (folder
name)*
=
Track title (file name)*
=
Current
track number with the elapsed playing time
=
Current track number with the clock
time
=
(back to the beginning)
* If the current disc is an audio CD, “NO NAME”
appears.
If an MP3/WMA file does not have Tag
information or <TAG DISPLAY> is set to
<TAG OFF> ( 13), folder name and file name
appear.
Using the remote controller
5
U
/
D
∞
: Selects folder of the
MP3/WMA
2
R
/
F
3
: Selects track
2
R
/
F
3
[Hold]
: Fast-forwards or
reverses the track
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
“NO USB” appears. Press
/ SOURCE
to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. (
9)
EN10-17_KD-R516_001A_3.indd 10EN10-17_KD-R516_001A_3.indd 10 11/25/09 9:09:49 AM11/25/09 9:09:49 AM
To Next Page
Loading...
