JVC KD-R620

7ENGLISH
Improving the FM reception
1
2
] <TUNER> ] <MONO> ] <MONO ON>
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06 / 07 – 12 / 13 – 18>
“SSM” flashes and local stations with the
strongest signal are searched and stored
automatically.
To preset another 6 stations, repeat the
above procedure by selecting one of the other
SSM setting ranges.
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and
6 stations for AM.
1
] Tune in to a station you want to
preset.
2
“PRESET MODE” flashes.
3
] Selects preset number.
Preset number flashes and “MEMORY”
appears.
Selecting a preset station
or
1
2
Changing the display information
Frequency j Clock
Using the remote controller
5 / ∞ : Changes the preset stations.
2 / 3 : [Press] Searches for stations
automatically.
[Hold] Searches for stations manually.
Listening to the radio
[Hold]
[Hold]
~
] “FM” or “AM”
Ÿ
• [Press] Searches for stations automatically.
• [Hold] Searches for stations manually.
“M” flashes, then press the button
repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
[Hold]
EN02-19_KD-R628[J]1.indd 7 9/28/10 4:23:31 PM