JVC KD-R621EY

15ENGLISH
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
[Hold]
Continued...
Menu item
Selectable setting, [Initial: Underlined]
DEMO
For settings, see page 4.
CLOCK
CLOCK SET For settings, see page 4.
24H/12H For settings, see page 4.
CLOCK ADJ *
1
AUTO : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. / OFF : Cancels.
COLOR
BUTTON ZONE 29 preset colors / USER / COLORFLOW 01/02/03 : Selects your preferred color
for buttons illumination (except for DISP / BRIGHTNESS / 0 ) and display color
separately.
• If <ALL ZONE> is selected, the button and display illumination will change to the
current/selected <BUTTON ZONE> color.
• Initial color : BUTTON ZONE [ 06 ], DISP ZONE [ 01 ], ALL ZONE [ 06 ]
DISP ZONE
ALL ZONE
COLOR SETUP
DAY COLOR BUTTON ZONE You can create your own day and night colors for
<BUTTON ZONE> and <DISP ZONE> separately.
Perform step 2 to select a primary color ( RED / GREEN /
BLUE ), then adjust the level [ 00 — 31 ]. Repeat this procedure
until you have adjusted all the three primary colors.
• If “ 00 ” is selected for all the primary colors for <DISP ZONE>,
nothing appear on the display.
DISP ZONE
NIGHT COLOR BUTTON ZONE
DISP ZONE
MENU COLOR
ON : Changes the display and buttons (except for DISP / BRIGHTNESS / 0 )
illumination during menu, list search and playback mode operations. / OFF : Cancels.
*
1
Takes effect only when CT (clock time) data is received.
All zone
Display zone
Button zone
EN02-21_KD-R621[E]f.indd 15EN02-21_KD-R621[E]f.indd 15 11/15/10 4:20:40 PM11/15/10 4:20:40 PM