To Next PageTo Next PageWhat does “PLEASE WAIT” mean on my JVC Car Receiver?
If “PLEASE WAIT” appears on your JVC Car Receiver, the unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
What does “ERROR” mean on my JVC KD-R780BT Car Receiver?
If “ERROR” appears on your JVC Car Receiver, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “H/W ERROR” mean on my JVC Car Receiver?
If “H/W ERROR” appears on your JVC Car Receiver, reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center.
What to do if “CODE ERROR” appears on JVC Car Receiver?
If your JVC Car Receiver displays “CODE ERROR”, make sure you have entered the correct pass code.
Why is the sound interrupted or skipped during Bluetooth playback on my JVC KD-R780BT Car Receiver?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your JVC Car Receiver, reduce the distance between the unit and the Bluetooth audio player. You can also try turning the unit off and on again, then attempt to reconnect. Be aware that other Bluetooth devices might be trying to connect to the unit.
Why can't I hear sound on my JVC Car Receiver?
If you cannot hear sound from your JVC Car Receiver, adjust the volume to the optimum level and check the cords and connections.
How to improve radio reception on JVC KD-R780BT Car Receiver?
To improve poor radio reception on your JVC Car Receiver, connect the antenna firmly.
Why is no Bluetooth device detected by my JVC Car Receiver?
If no Bluetooth device is detected by your JVC Car Receiver, search from the Bluetooth device again or reset the unit.
Why pairing cannot be made with JVC KD-R780BT?
If pairing cannot be made with your JVC Car Receiver, ensure you have entered the same PIN code to both the unit and Bluetooth device. You can also delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
What to do if “MISWIRING CHECK WIRING THEN PWR ON” appears on JVC KD-R780BT?
If the message “MISWIRING CHECK WIRING THEN PWR ON” appears on your JVC Car Receiver, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
General| Brand | JVC |
|---|---|
| Model | KD-R780BT |
| Category | Car Receiver |
| Language | English |
Overview of the unit's front panel controls and indicators.
Initiating audio playback from connected media devices.
Connecting the SiriusXM Vehicle Tuner and activating the subscription.
Overview of Bluetooth connectivity features and profiles.
Step-by-step guide for initial device pairing.
Instructions for initiating phone calls using the Bluetooth hands-free function.
Configuring audio signal routing for different speaker connection types.
Solutions for common operational issues and error messages.
Step-by-step instructions for physically installing the receiver.
Diagram and guide for connecting the unit's wiring harness.
