EasyManuals Logo
Home>JVC>Car Receiver>KD-R907

JVC KD-R907 User Manual

JVC KD-R907
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
ENGLISH
25SETTINGS
Continued on the next page
Category Menu items Selectable settings, [reference page]
Color
Ring Color *
3
On
Off
: When a call comes in, the display will flash in blue.
The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a SMS, the display only illuminate
in blue.
: Cancels.
Audio
Fad/Bal *
4,
*
5
Fader/Balance
R6 – F6
L6 – R6
: Fad: Press 5 / to adjust the front and rear speaker
output balance. (Initial: 0)
: Bal: Press 4 / ¢ to adjust the left and right
speaker output balance. (Initial: 0)
Loud
Loudness
Loud1/Loud2/
Loud3
Off
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
Volume Adjust Level –5 —
Level +5
(Initial: Level 0)
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
Before making an adjustment, select the source you
want to adjust.
“FIX” appears on the display if “
FM/FM-LOW
” is
selected as the source.
Subwoofer LPF/Level
Phase
: Press 4 / ¢ to select the cutoff frequency to
the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies higher
than 55 Hz/85 Hz/120 Hz are cut off.
Turn the control dial to adjust the subwoofer output level.
Level 00 to Level 08 (Initial: Level 04)
: Turn the control dial to select the subwoofer phase.
0deg (normal) or 180deg (reverse)
HPF
High pass filter
Select the cutoff frequency to the front/rear speakers. Set this to match the LPF
settings.
62Hz/95Hz/
135Hz
Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut off.
: All signals are sent to the front/rear speakers.
*
3
Displayed only when USB Bluetooth Adapter (KS-UBT1) is connected.
*
4
If you are using a two-speaker system, set the fader level to <0>.
*
5
This adjustment will not affect the subwoofer output.
EN20-25_KD-R907[EE]_1.indd 25EN20-25_KD-R907[EE]_1.indd 25 10/3/09 1:53:20 PM10/3/09 1:53:20 PM

Table of Contents

Other manuals for JVC KD-R907

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-R907 and is the answer not in the manual?

JVC KD-R907 Specifications

General IconGeneral
BrandJVC
ModelKD-R907
CategoryCar Receiver
LanguageEnglish

Related product manuals