JVC KD-R921BTEY

16 ENGLISH
To select a contact from the phonebook
1 Select “Phonebook” calling method.
(page 15)
2 Press 5 / ∞ to show the search menu
(A to Z, 0 to 9, and OTHERS).
“OTHERS” appears if the 1st character is not
A to Z, or 0 to 9, such as #, —, !, and etc.
3 Press 5 / ∞ to select your desired
character, then press the control dial to
confirm.
The name list of the selected character
appears.
4 Turn the control dial to select your
desired contact, then press to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold 5 / ∞ to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching may take some time.
To delete a contact (name/phone number)
Only when “In Unit” is selected for
“Phonebook Select”. (page 15)
1 Press to enter “HF Menu” screen.
2 Display the list of name/phone numbers
using one of the calling methods.
(page 15)
3 Turn the control dial to select the name/
phone number you want to delete.
4 Press and hold T/P BACK to enter the
“Delete Entries” screen.
5 Turn the control dial to select “Delete” or
“Delete All.”
• If “Delete” is selected, the selected name/
phone number in step 3 is deleted.
• If “Delete All” is selected, the listed
numbers in step 2 selection are deleted.
6 Press the control dial to confirm.
• Ringing Tone
In Unit [Initial] : The unit rings to alert you
when a call/Text Message comes in.
– Call : Select your preferred ring tone when a
call comes in [ Tone 1 — 5 ].
– Message : Select your preferred ring
tone when a text message comes in
[
Tone 1 — 5 ].
• Default ring tone is different according to the
paired device.
In Phone : The unit rings using the connected
phones’ ring tone to alert you when a call/Text
Message comes in. (The connected mobile phone
rings if it does not support this feature.)
• Ring Color
29 preset colors [ Initial: Color 06 ] : When a
call/text message comes in, the display will flash
in the selected color. (The display will change to
the original color when the call is answered or the
incoming call stops.) / Off : Cancels.
• NR/EC Mode
On [Initial] : The unit adjusts the Noise Reduction
and Echo Cancellation of the microphone
connected to the unit for clearer sound. /
Off : Cancels.
• MIC Setting
Adjust the sensitivity [ Level 01 / 02 / 03 ]
of the microphone connected to the unit.
[ Initial: Level 02 ]
• Message Notice
On [Initial] : The unit informs you of the arrival
of a message by ringing and displaying “[Device
name] Received Message.” / Off : The unit does
not inform you of the arrival of a message.
EN02-37_KD-R921BT_003A_2.indd 16EN02-37_KD-R921BT_003A_2.indd 16 2/9/11 9:54:41 AM2/9/11 9:54:41 AM