JVC KD-R921BTEY

27ENGLISH
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
[Hold]
Menu item
Selectable setting, [ Initial: Underlined ]
DEMO
On : Display demonstration will be activated automatically if no operation is done for
about 20 seconds. / Off : Cancels. (page 4)
Clock
Set Clock For settings, see page 4.
24H / 12H For settings, see page 4.
Clock Adjust *
1
Auto : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. / Off : Cancels.
Color
Button Zone 29 preset colors / User / COLORFLOW 1/ 2/ 3 : Selects your preferred color for
buttons illumination (except for EQ / DISP / OPEN / BRIGHTNESS ) and display
color separately.
• If <All Zone> is selected, the button and display illumination will change to the
current/selected <Button Zone> color.
• Initial color : Button Zone [ 06 ], Display Zone [ 01 ], All Zone [ 06 ]
Display Zone
All Zone
Color Setup
Day Color Button Zone You can create your own day and night colors for <Button Zone>
and <Display Zone> separately.
Press 5 / ∞ to select a primary color [ Red / Green / Blue ], then
turn the control dial to adjust the level [ 00 — 31 ]. Repeat this
procedure until you have adjusted all the three primary colors. Then,
press the control dial to confirm.
• If “ 00 ” is selected for all the primary colors for <Display Zone>,
nothing appear on the display.
Display Zone
Night Color Button Zone
Display Zone
Menu Color
On : Changes the display and buttons (except for EQ / DISP / OPEN /
BRIGHTNESS ) illumination during menu, list search and playback mode operations. /
Off : Cancels.
*
1
Takes effect only when CT (clock time) data is received.
All zone
Display zone
Button zone
Continued...
EN02-37_KD-R921BT_003A_2.indd 27EN02-37_KD-R921BT_003A_2.indd 27 2/9/11 9:54:44 AM2/9/11 9:54:44 AM