JVC KD-R991BT User Manual

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BASICS
Remote control (RM-RK52)
Aim the remote control directly at the remote sensor on the
unit.
( 3 or 4)
How to replace the battery
Pull out the insulation
sheet when using for
the first time.
To On the remote control
Adjust the
volume
Press or .
• Press and hold
to continuously
increase the volume to 15.
Press
to mute the sound or pause
playback.
• Press again to cancel. The volume
level returns to the previous level
before muting or pause.
Select a source Press SOURCE repeatedly.
GETTING STARTED
For key layout on the faceplate, see page3 or page4.
Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to [YES] , 6 ),
the display shows:
KD-R991BT / KD-R891BT :
“CANCEL DEMO”
“PRESS ENTER”
1 Press .
[YES] is selected for the initial setup.
2 Press again.
“DEMO OFF” appears.
KD-R792BT :
“CANCEL DEMO”
“PRESS” “VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Perform ‘select an item ( 3 or 4)’ operation to select [CLOCK] .
3 Perform ‘select an item ( 3 or 4)’ operation to adjust the clock.
[CLOCK ADJUST] set the hour and minute [CLOCK FORMAT] [12H] or [24H]
4 Perform ‘select an item ( 3 or 4)’ operation to set the date.
[DATE SET] set the day, month and year
5 Press to exit.
To return to the previous setting item, press .
1
2
JS_JVC_KD_R991BT_M_EN_2.indd 5JS_JVC_KD_R991BT_M_EN_2.indd 5 7/24/2017 10:07:10 AM7/24/2017 10:07:10 AM

JVC KD-R991BT Specifications

General

Brand	JVC
Model	KD-R991BT
Category	Car Receiver
Language	English