JVC KD-S10

12
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1 Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
(Bass) |
+06 (max.)
TRE Adjust the treble. –06 (min.)
(Treble) |
+06 (max.)
FAD Adjust the front R06 (Rear only)
(Fader)* and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
(Balance) and right speaker |
balance. R06 (Right only)
VOL Adjust the volume. 00 (min.)
(Volume) |
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
2 Adjust the level
Ex.: when you adjust “TRE” (treble)
Note:
Normally the + and – buttons work as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these
frequencies to produce well-balanced sound
at low volume level.
Each time you press LOUD, the
loudness function turns on and off
alternatively.
@A
To increase the level.
To decrease the level.
LOUD (loudness) indicator
EN12-14-KD-S5050[J]f 7/29/03, 10:23 AM12