JVC KD-S100

• Checking the XM Satellite radio ID
While selecting "XM1," ''XM2,'' or "XM3," select
"(hannel 0."
6 Select a user preset number.
\('~';!$\
/:""(h~Jj
• You can move to the lists ofthe other SIRIUS bands by
turning the control dial.
The display alternately shows "RADIO 10" and the
8-digit (alphanumeric) 10 number.
7 Store the channel.
To cancel the ID number display, select any channel
other than "Channel 0."
[Hold]
SIRIUS 1 p4 ~Hl04
:>\NEWS
~ CNN Headline News
1:00
You can preset six channels for each band.
4 Finish the procedure.
3 Perform steps 3 to 6 (on the left column)
to select a user preset channel.
1 t$oU~G.~b~ C_~~~~~_~_~
2
4;~W r SR1 ... SR2 ... SR3 J
• Holding this button displays the User Preset
Channel List (see step 6 above).
t BANdt? r SR1 ... SR2 ... SR3 J
• Holding the button displays the User Preset
Channel List (see step 6 on the right column).
2
Ex.: Storing a SIRIUS channel into preset number 4 of
the SRl band.
3 Enter the MODE menu (see page 4).
4 Select JlPreset."
5
[Turn] [pre:et ....... (ate.gor
y
J
Channel
• Selecting a category from the list
1 Enter the MODE menu (see page 4).
...
2
I Preset ....... Category J
L-.-. Channel •