JVC KD-S733R - Other Main Functions; Setting the Clock; Changing the General Settings (PSM)

21
ENGLISH
OTHER MAIN FUNCTIONS
Setting the clock
You can also set the clock system to either 24 hours
or 12 hours.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 22.)
2 Set the hour.
1 Select “CLOCK H (hour)” if not shown on
the display.
2 Adjust the hour.
3 Set the minute.
1 Select “CLOCK M (minute).”
2 Adjust the minute.
4 Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5 Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
2
1
2
1
12
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 22.)
2 Select the PSM item you want to
adjust. (See page 22.)
3 Adjust the PSM item selected.
EN21-24.KD-S733_731R[E]f.pm5 11/2/01, 10:27 AM21