JVC KD-S88BT

26 ENGLISH
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC =
VOCAL BOOST
= BASS BOOST = USER =
(back to the beginning)
While listening, you can adjust the subwoofer
level and tone level of the selected sound
mode.
1
2
] Adjust the level:
SUB.W * : 00 to 08
BASS/ MID/ TRE : –06 to +06
The sound mode is automatically stored
and changed to “USER.”
*
Subwoofer level is adjustable only when
<L/O MODE> is set to <SUB.W>. (page 28)
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <BASS/ MIDDLE/ TREBLE>
3
] Adjust the sound elements (see table
below) of the selected tone.
4
Repeat steps 2 and 3 to adjust other
tones.
The adjustments made is automatically
stored and changed to “USER.”
Sound element
BASS [ Initial: 50 Hz, 00, Q1.0 ]
Frequency: 50/ 100/ 200 Hz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
MIDDLE [ Initial: 1.0 kHz, 00, Q1.0 ]
Frequency: 0.5/ 1.0/ 2.0 kHz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
TREBLE [ Initial: 10 kHz, 00, Q1.0 ]
Frequency: 5/ 10/ 15 kHz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
[Hold]
Selecting a preset sound mode
[Hold]
EN02-35_KD-S88BT[J]_2.indd 26EN02-35_KD-S88BT[J]_2.indd 26 7/15/11 10:13:47 AM7/15/11 10:13:47 AM