JVC KD-S895 User Manual

9
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1 Select the band (FM 1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Start searching a station.
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching a station manually:
Manual search
1 Select the band (FM 1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
FM1 FM2 FM3 AM
FM1 FM2
FM3 AM
CONTINUED ON THE NEXT PAGE
To search stations of
higher frequencies
To search stations of
lower frequencies
EN09-11KD-S895[U]f.p65 1/8/03, 12:00 PM9

JVC KD-S895 Specifications

General

Brand	JVC
Model	KD-S895
Category	Car Receiver
Language	English