To Next PageTo Next PageWhat to do if my JVC Car Receiver says “NO DISC”?
If your JVC Car Receiver displays “NO DISC”, it might be due to a missing disc in the magazine. Try inserting a disc. Also, ensure the unit is correctly connected to the CD changer, and then press the reset button on the CD changer.
Why won't my JVC KD-SX8250 play CDs?
If your JVC Car Receiver CD cannot be played back, there are several possible reasons: * The disc may be inserted upside down or incorrectly – ensure it's inserted correctly. * The disc may be scratched – try changing the disc. * The CD-R/CD-RW might not be finalized – finalize it using the component you used for recording, or insert a finalized CD-R/CD-RW. * The volume level may be too low – adjust it to an optimum level. * Check the cords and connections. * If the built-in microcomputer is malfunctioning, press the reset button on the panel holder using a ball-point pen after detaching the control panel.
Why is SSM (Strong-station Sequential Memory) automatic preset not working on my JVC KD-SX8250?
If the SSM (Strong-station Sequential Memory) automatic preset is not working on your JVC Car Receiver, it could be due to weak signals. In this case, store stations manually. Another reason might be that the antenna is not connected firmly, so ensure the antenna is properly connected.
General| Brand | JVC |
|---|---|
| Model | KD-SX8250 |
| Category | Car Receiver |
| Language | English |
