JVC KD-T409

10
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
Other settings
1
Press and hold .
2 Perform ‘Select an item (page3 or 4)’ operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[EQSETTING]
[PRESET EQ]
Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASYEQ] or [PROEQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/
[JAZZ]/[POP]/[R&B]/[TALK]/[USER]/[VOCALBOOST]/[BASSBOOST]/
[CLASSICAL]/[DANCE]
[EASYEQ]
Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [PRO EQ].
[SUB.W SP]*1*2: [00] to [+06] (Default: [+03]
[SUB.W]*1*3: [–08] to [+08] [00]
[BASS]: [LVL–06] to [LVL+06] [LVL00]
[MID]: [LVL–06] to [LVL+06] [LVL00]
[TRE]: [LVL–06] to [LVL+06] [LVL00])
*1, *2, *3: (page 11)
For key layout on the faceplate, see page 3 or page 4.
Select a preset equalizer directly (for KD-T409/KD-T402)
Press EQ-BASS repeatedly.
(or)
Press EQ-BASS, then turn the volume knob within 5seconds.
Preset equalizer:
[FLAT] (default)/ [DRVN3] / [DRVN2] / [DRVN1] / [HARDROCK] / [HIPHOP] / [JAZZ] / [POP] /
[R&B] / [TALK] / [USER] / [VOCALBOOST] / [BASSBOOST] / [CLASSICAL] / [DANCE]
• Drive equalizer ( [DRVN3] / [DRVN2] / [DRVN1] ) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
Select a drive equalizer directly (for KD-T401)
Drive equalizer boosts specific frequencies in the audio signal to reduce the
noise heard from outside the car or running noise of the tyres.
Press drvn-BASS repeatedly.
Drive equalizer: [DRVN 3] (default)/ [DRVN 2] / [DRVN 1]
Store your own sound settings
1
Press and hold the following button to enter [EASY EQ] setting.
KD-T409/KD-T402: EQ-BASS
KD-T401: drvn-BASS
2 Perform ‘Select an item (page3 or 4)’ operation to make the
setting.
Refer to [EASYEQ] for setting and the result is stored to [USER] .
• To return to the previous setting item, press
.
• Press the following button to exit.
KD-T409/KD-T402: EQ-BASS
KD-T401: drvn-BASS
JS_JVC_KD_T409_E_EN_06.indd 10JS_JVC_KD_T409_E_EN_06.indd 10 7/17/2018 2:34:54 PM7/17/2018 2:34:54 PM