EasyManua.ls Logo

JVC KD-T902BT

JVC KD-T902BT
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
17
Make a call using voice recognition
1
Press and hold
to activate the connected phone.
2 Speak the name of the contact you want to call or the voice command
to control the phone functions.
Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Perform ‘Select an item (page3 or 4)’ operation to select
[RECENTCALL]
,
[PHONEBOOK]
or
[DIALNUMBER]
.
3 Perform ‘Select an item (page3 or 4)’ operation to select a
contact or enter a phone number.
If a contact is selected, press the following to show the phone number.
KD-T902BT: Volume knob
KD-T901BT: * ENTER
4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select
[DIALNUMBER]
in step 2
and store a blank number.
BLUETOOTH®
Make a call from memory
1
Press
to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the following to call.
KD-T902BT: Volume knob
KD-T901BT: * ENTER
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold
.
2 Perform ‘Select an item (page3 or 4)’ operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[BT MODE]
[PHONE SELECT]* Selects the phone or audio device to connect or disconnect.
” appears in front of the device name when connected.
” appears in front of the current playback audio device.
[AUDIO SELECT]*
[DEVICE DELETE]
1
Perform ‘Select an item (page 3 or 4)’ operation to select a device
to delete.
2
Perform ‘Select an item (page 3 or 4)’ operation to select [YES] or
[NO].
* You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time.

Related product manuals