Why does “LOADING” appear on JVC Car Receiver when searching?
If your JVC Car Receiver displays “LOADING” when you enter search mode by pressing , the unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.
Why is Bluetooth audio skipping on my JVC KD-T952BT Car Receiver?
If sound is being interrupted or skipped during playback of a Bluetooth audio player on your JVC Car Receiver: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Turn off, then turn on the unit and try to connect again. 3. Other Bluetooth devices might be trying to connect to the unit.
How to stop noise from JVC KD-T952BT?
If your JVC Car Receiver is generating noise, skip to another track or change the disc.
Why does JVC KD-T952BT say “NOT SUPPORT” for phone features?
If your JVC Car Receiver displays “NOT SUPPORT”, the connected phone does not support the Voice Recognition feature or phonebook transfer.
What does “PLEASE WAIT” mean on JVC KD-T952BT Bluetooth?
If your JVC Car Receiver displays “PLEASE WAIT”, the unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
Why are the characters displayed incorrectly on my JVC KD-T952BT Car Receiver?
This JVC Car Receiver can only display uppercase letters, numbers, and a limited number of symbols. Depending on the display language you have selected, some characters may not be displayed correctly.
How to improve radio reception on JVC KD-T952BT Car Receiver?
If the radio reception on your JVC Car Receiver is poor, ensure the antenna is firmly connected.
What to do if “MISWIRING CHECK” appears on JVC KD-T952BT Car Receiver?
If your JVC Car Receiver displays “MISWIRING CHECK,” turn the power off. Check the speaker wires to ensure the terminals are properly insulated. Then, turn the power back on.
What to do if “PROTECTING SERVICE” appears on JVC KD-T952BT?
If your JVC Car Receiver displays “PROTECTING SERVICE”, the unit needs to be inspected by a professional. Send the unit to the nearest service center.
Why won't my JVC KD-T952BT Car Receiver pair with Bluetooth?
If you are unable to pair a Bluetooth device with your JVC Car Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. If the problem persists, delete the pairing information from both devices and perform the pairing process again.
General| Brand | JVC |
|---|---|
| Model | KD-T952BT |
| Type | Car Receiver |
| DIN Size | Single DIN |
| Power Output | 50 W x 4 |
| RMS Power Output | 22 W x 4 |
| Peak Output | 50 W x 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Compatible Formats | MP3, WMA |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Display Type | LCD |
| Tuner | FM/AM |
| Radio Tuner | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Subwoofer Output | Yes |
| Preamp Voltage | 2.5V |
| SiriusXM Ready | No |
| Pandora Control | Yes |
| Spotify Control | Yes |
| iHeartRadio Control | Yes |
| Android Music Playback | Yes |
| iPhone Music Playback | Yes |
| Steering Wheel Control Compatible | Yes |
| Steering Wheel Control | Yes |
| CD Player | Yes |
| RMS Power Output (CTA-2006) | 22 Watts x 4 Channels |
| Equalizer | 13-Band Graphic Equalizer |
To Next Page
